Home > Fasteners > All Thread Rod > Stainless Steel > 316 Stainless Steel All Thread Rod > 1-8 X 36 ALL THREAD ROD

1-8 X 36 ALL THREAD ROD

Get Product Data
Click to Enlarge
Quantity:
 
(Product ID: SS316-175-1603)
1-8 X 36" ALL THREAD ROD 316 STAINLESS STEEL
Specifications
  • Size (D): 1-8
  • Length (L): 36
  • Grade/Spec: 316
  • Plating/Finish: Passivated
  • Thread Type: Coarse
Mechanical Properties
  • Tensile: 70,000 min psi
  • Yield: 30,000 min psi
  • Hardness: 70 Rockwell B min
  • Elongation: 30% min 
  • Reduction in Area: 40% min
Other Product Requirements
  • Threads: ANSI B1.1 Class 1A or 2A
Additional Information
  • Pressure applied during roll threading causes Stainless Steel Rod to elongate. As the Rod stretches, the pitch diameter is reduced, which may reduce the thread class.
  • 316 Stainless Steel has similar physical and mechanical properties compared to 18-8 and 304 Stainless. The primary differentiator is in Type 316’s material composition: 10% Chromium, 16% Nickel and 2% Molybdenum.
  • The additional Nickel content as well as the inclusion of Molybdenum increases corrosion resistance to sulfides and chlorides (like salt). Many customers select 316 Stainless Steel over 18-8 and 304 for seaside applications.  
  •  Fast, in house cutting and chamfering service is also available.   
Related Hardware
​Call 808-834-1919 or email Sales@HawaiiNutandBolt.com with your questions, submittal requests and order requirements. 

Note: The information presented above is believed to be accurate at time of preparation. However, Hawaii Nut & Bolt, Inc shall not be responsible for any claim, loss, or damage traceable to information and/or errors (typographical or otherwise) as contained herein. Reliance on such information for any purpose shall be at the sole risk of that person. Information provided is in no way intended to be used as a substitute for the judgment of design professional Information provided is in no way intended to be used as a substitute for the judgment of a design professional.